A construction project is sustainable when the decisions made at each stage, from choosing the site to running the finished building, follow the 7 principles of sustainability and hold up against all three of the 3 pillars: environmental, economic and social. Stage by stage, that means the following.
Planning and design
Start with the site. A brownfield site, or one with existing infrastructure, has a smaller environmental impact, leaves natural habitats undisturbed and is a responsible use of land. Then bring everyone in early. Architects, engineers, contractors, the client and the local community should all be involved at the design stage so that the sustainability goals are fixed at the outset and not bolted on later.
The design itself should cut energy demand before any equipment is chosen, through passive solar design, proper insulation and energy-efficient lighting and HVAC systems. If you want the performance recognised, aim for a certification such as BREEAM, LEED or Green Star.
Materials and resources
Use recycled, renewable or low-impact materials, and source them locally where you can to cut transport emissions. Design to use fewer materials in the first place, and consider off-site prefabrication, which produces less waste and better quality than the same work done on site. Write a waste management plan that sets out how construction waste will be reduced, reused and recycled.
Construction
On site the main levers are energy, water and pollution. Use energy-efficient plant and vehicles, fit low-flow fixtures and recycle water on site. Plan the works to limit emissions and dust, put pollution controls in place, and dispose of hazardous materials properly. Keep health and safety standards high for the workforce, and use non-toxic materials so that the finished building has healthy indoor air.
Operation and maintenance
Install renewable energy systems such as solar panels or wind turbines, and an energy management system that monitors consumption and shows where it can be cut. Harvest rainwater, recycle greywater and use efficient irrigation. Design for durability and ease of maintenance: materials and systems that need little upkeep and are easy to repair or replace cost less over the life of the building.
People and money
Involve the local community in the planning process; a project that meets local needs is more likely to win local support. Run a life cycle cost analysis so that the scheme is cost-effective over its whole lifespan, and count the long-term savings from energy efficiency and lower maintenance when you compare options. Inside the building, design for natural light, good ventilation, thermal comfort and indoor air quality, because those are what affect the health and well-being of the people who use it.
Technology
Smart building technologies can manage energy use, water consumption and overall performance once the building is occupied. Building Information Modelling (BIM) earns its place earlier, during design and construction, where it improves collaboration, reduces errors and makes the process more efficient.