Carbon capture materials are substances designed to take carbon dioxide (CO₂) out of the atmosphere or out of an industrial process and hold it. They are widely seen as an important piece of the long-term answer to emissions, and in the long term we think that is right; in the present there are hurdles still to clear. Carbon capture, utilisation and storage (CCUS) as a whole is at an early stage in the UK construction industry, but it is getting more attention, and the materials play a major part in it.
The point of them is simple. Less CO₂ released to the atmosphere means a smaller carbon footprint for any industry or project that adopts them.
Five families of material
| Family | Examples | How it captures and releases CO₂ |
|---|---|---|
| Absorbents | Amines (chemical); zeolites and activated carbon (physical) | A chemical absorbent such as an amine reacts with CO₂ to form a stable compound, which is later heated to release the CO₂ for storage or use. A physical absorbent traps the CO₂ in its pores with no reaction, and a change of pressure or temperature releases it. |
| Adsorbents | Metal-organic frameworks (MOFs), porous silica, calcium oxide (CaO) | A solid adsorbent holds CO₂ on its surface. MOFs are porous enough to trap large amounts, and a change of temperature or pressure releases the gas so the material can be reused. Calcium oxide works by carbonation: it reacts with CO₂ to form calcium carbonate (CaCO₃), and the reaction can be reversed to release the CO₂ and recover the CaO. |
| Membranes | Selective permeation membranes; hybrid polymer membranes | A membrane lets CO₂ through and blocks the other gases in a mixture, which is how CO₂ is taken out of industrial flue gases. Hybrid membranes combine polymers with other materials for better selectivity and efficiency. |
| Carbonate-based materials | Magnesium and calcium carbonates; concrete and cement additives | Magnesium and calcium carbonates react with CO₂ to form stable carbonates, which locks the gas into a solid. This is mineral carbonation, and it is being explored for long-term storage. Some concrete formulations take in CO₂ while curing and turn it into solid calcium carbonate embedded in the concrete, which adds strength as well as holding the carbon. |
| Biomass-based materials | Biochar; algae | Biochar is made by pyrolysis, heating organic material without oxygen, and can hold carbon in soil for centuries while improving the soil. Algae absorb CO₂ through photosynthesis and turn it into biomass for biofuels and other products. |
How a capture cycle runs
Whatever the material, the process has the same shape. First comes capture: CO₂ is taken from the air or from exhaust gases and bound to the material, physically or chemically depending on the type, or separated from the other gases by a membrane. Then comes release. A change of temperature or pressure lets the CO₂ go and frees the material for another cycle; for a chemical absorbent that means heating it to break the bonds holding the CO₂.
Once released, the CO₂ either goes into storage, typically underground in geological formations, or into a process that uses it, such as enhanced oil recovery or the production of synthetic fuels. Mineralisation is the exception to the cycle. Materials such as certain carbonates lock the CO₂ into a solid, stable form as a mineral, which is permanent and cuts the risk of the gas finding its way back into the atmosphere.
Where they are used
The applications fall into four areas. Industrial emissions come first: capturing CO₂ from power plants, cement production and steel manufacturing. Direct air capture (DAC) pulls CO₂ straight out of the atmosphere with specialised adsorbents or absorbents. In enhanced oil recovery (EOR), captured CO₂ is used to increase the oil extracted from a well and stays stored underground afterwards. And in construction materials, CO₂ is built into products such as concrete and sequestered there permanently.
What is holding them back
At first glance these materials look like the answer to the whole problem. As with any new technology, though, there are things in the way, and in construction the first is cost: many of the materials are expensive to produce and to regenerate, and construction is a highly cost-sensitive industry, so adoption is limited. Scale is the second. Many CCUS technologies are still in development and not ready for large-scale deployment, and getting them to the point where they capture significant amounts of CO₂ is a major challenge in itself.
Energy is the third. Capturing CO₂ and then releasing it can take a lot of it, and unless that energy is renewable it offsets part of the benefit. The fourth sits with government: policies, subsidies and regulation that are kept up for long enough will be needed before the materials are adopted widely.
No single measure is going to be the answer to greenhouse gas emissions, and carbon capture materials are no exception. Their mechanisms are often simple, absorption, adsorption and mineralisation among them, and each has its own uses. Once the cost and the scale problems are solved, we expect them to make a large contribution to the overall solution.