A whole life carbon assessment (WLCA) counts a building's greenhouse gas emissions from the extraction of its raw materials to its disposal at end of life. An operational energy assessment stops at what the building uses in operation; a WLCA covers everything else as well: the carbon in the materials, the construction work, the maintenance and replacement cycles, and the demolition. That gives a figure you can act on, and a basis for decisions that weigh carbon against cost and performance. The method is set out in BS EN 15978, which divides a building's life into the modules below. We have written before about carbon assessments in general; this piece is about the structure of the whole life version.

How BS EN 15978 divides a building's life

The standard groups the modules into four stages, product, construction, use and end of life, and adds a fifth, Module D, for benefits and burdens that fall beyond the building's own life cycle. Embodied carbon is the carbon of making materials and building with them; operational carbon is what the building emits in use, mostly through energy. The stage-by-stage breakdown shows where each comes from and what reduces it, and that transparency is the point of the exercise.

Product stage (A1–A3)

Everything in this stage happens before construction starts.

Module What it covers
A1 Raw material supply Extracting and processing raw materials: quarrying aggregates, mining metals, harvesting timber, and the energy use and land impacts involved
A2 Transport Moving those raw materials to the factory
A3 Manufacturing Making construction products and components, including energy-intensive processes such as smelting, firing and chemical processing for cement, glass and insulation

The carbon intensity of the materials you specify is fixed here, and it is the embodied carbon the building carries from day one. Knowing the carbon intensity of each material at this stage is what lets you reduce it before it is locked in.

Construction stage (A4–A5)

Module What it covers
A4 Transport to site Delivering construction products to the site
A5 Construction and installation On-site activity: machinery, energy use and the waste the work generates

A4 comes down with efficient logistics and local sourcing. A5 comes down with good site management, less waste and low-carbon construction techniques.

Use stage (B1–B7)

The use stage is usually the longest in a building's life and covers everything emitted while it is occupied and operated.

Module What it covers
B1 Use General use of the building, where not counted in another module
B2–B3 Maintenance and repair Routine maintenance and the repairs the building needs
B4–B5 Replacement and refurbishment Replacing and refurbishing components over the building's life
B6 Operational energy use Heating, cooling, ventilation and lighting; often the largest contributor to lifetime emissions
B7 Operational water use Treating, pumping and heating water

B6 is where the operational carbon sits, and bringing it down, through design that cuts demand and renewable energy that meets what remains, is the main route to net zero performance.

End of life stage (C1–C4)

Module What it covers
C1 Deconstruction and demolition Dismantling or demolishing the structure
C2 Transport Moving waste to processing or disposal
C3 Waste processing Sorting, crushing, incineration and similar
C4 Disposal Landfill and other final disposal

Circular economy principles cut this stage: a building designed for disassembly, with components that can be reused or recycled, produces less waste and fewer emissions when it comes down.

Beyond the life cycle (Module D)

Module D records benefits and burdens that arise after the building's own life. It credits materials reused or recycled into new products, and energy recovered from waste. Recycling the steel, for example, reduces the need for new virgin production, and the emissions that avoids are counted here as an offset against future production. Module D is what rewards material recovery and closed-loop design in the assessment, and it is the module that pushes the method towards circular construction.

Using the results

A completed WLCA shows where the emission hotspots are, module by module, so the team can put its effort where the carbon is. It informs four decisions: which materials to specify, how to build, how to run the building, and what happens to its materials at the end, including reuse and recycling. The assessment works best when architects, engineers, contractors and sustainability consultants share one model, with digital tools that hold the material, energy and carbon data together. Applied that way, it is the basis of low-carbon design and the route to a net zero building. WholeLifeCarbon.com has further resources on the method.